receiver Batteries

Change receiver batteries

To change the battery of the receiver follow the procedure described below:

1. Loosen the screws from the bottom of the receiver using a TX6 screwdriver.
2. Remove the bottom part of the receiver.
3. Hold the receiver upright to remove the battery from the receiver.
4. Insert the new battery with the text and the front of the receiver facing the same way.
5. Reattach the bottom of the receiver and tighten the screws.

Figure 1-27 How to change the battery of the CoCon receiver

Battery Maintenance

• For low frequency usage: less than four hours and not used daily
• Remove the battery after three years.
• For high frequency usage: receivers are used over six hours per day and almost daily
• Change batteries when the battery life of the receivers is significantly reduced.